Category: Building Materials & Products

Why Insulated Sandwich Panels
Are Popular In Construction

Sandwich panels are products used to clad the walls and roofs of buildings; each panel comprises a core like part of thermo insulating material which is skinned on both sides with sheet metal. Insulated sandwich panels are curtain materials, not structural materials. The structural forces in these panels are carried by the steel framework or other carrier frame to which the sandwich panels are attached. Types of sandwich panels range from;  sandwich panels with cores of EPS (expanded polystyrene), mineral wool and polyurethane (PIR, or polyisocyanurate.  All of these are readily available at Bansal Roofing Products Limited. We are the pioneers of high quality, premium roofing sheets and roofing accessories that will add to the strength and aesthetics of your construction. Insulated sandwich panels are gaining immense popularity in the construction industry through private as well as government projects. PUF panels, EPS panels, rock wool and glass wool panels are examples of the same. These insulated puf panels are available in a variety of thicknesses depending upon the application and requirements. The application of the same ranges from accommodation shelters, low-cost housing, wall cladding, cold storage and portacabins as well as extensive usage in industries such as the seafood industry, meat and poultry, and milk and dairy industries. Let’s take a look at why insulated sandwich panels have gained popularity in construction: Insulated sandwich panels are popular in the Indian construction industry owing to their frequent usage, the reasons for the same being; #1 – Excellent Quality: Insulated puf panels are manufactured in a controlled environment, in the presence of experienced and skilled technicians who are qualified professionals. The main focus for the same lies in the quality of material, to use high-grade material for manufacturing such panels. The quality of insulated panels renders them to be highly efficient and can be used in construction without any difficulty. Also Read: Roof Repair vs Roof Replacement – Let us Help You Make The Right Choice #2 – Strength: Insulated sandwich panels are extremely strong and are manufactured according to strict standards of strength and quality. EPS panels mostly used for outer walls, roofs and ceilings are utilized because-of this very virtue of these panels. They have a high load-bearing capacity and can withstand vigorous weather conditions. #3 – Green Building Materials: EPS, PUF, Rockwool and Glasswool are pollution-free and are 100% recyclable. With the entire world making conscious choices towards sustainability for the betterment of the environment, such a product in the construction industry is bound to be preferred. Insulated puf panels can also be dismantled if the need arises and all the panels can be used elsewhere or in the same structure. This is a prominent feature of these panels, which is also the reason for attracting customers towards the same. Also Read: Green Industrial Buildings For A Better Tomorrow #4 – Low cost of maintenance: Buildings made of insulated sandwich panels require low to very little maintenance. Moreover, these can be cleaned with a simple process of soap and water. These insulated panels are energy efficient which enables 30-40% energy saving on a yearly basis. #5 – Weather Friendly Product: Insulated sandwich panels are weather friendly and any weather condition doesn’t affect them. Be it storms, rain or scorching heat, with Bansal Roofing’s insulated sandwich panels you won’t have to compromise on quality and durability. Insulated puf panels are also fire resistant as well as suitable for stringent conditions. When you avail insulated sandwich panels of high quality from Bansal Roofing, you avail the benefits of energy-efficient and durable panels that are suitable for diverse applications. These can also withstand wind velocity up to a maximum level and withstand heavy snowfall/rainfall. Our insulated sandwich panels are easy to install with a screw-down system just like any other metal sheet. For more information, You can call us at +91-9925050913 or inquiry at inquiry@bansalroofing.com.

Pre-Engineered Buildings – Components and Advantages

Pre-Engineered Buildings also known as PEB have taken over the construction market by their multiple advantages and virtues. A PEB manufacturer designs a PEB and has a single design fabricated using various materials as well as methods that can satisfy different kinds of aesthetic and structural requirements of clients.  Hence, one could say that a pre-engineered building is made of components that are manufactured at a factory and assembled at a particular site. PEBs are structures of steel and have been booming in the construction market as alternatives to conventional steel buildings. The components of every PEB are fabricated at the manufacturing factory to an exact size and are transported to the main site for assembling the same. The main components building up the PEBs are: The structural steel framing system Metal roofing system And Wall panels of various materials In order to design a pre-engineered building with precision, a clear span between bearing points, roof slope, live loads, dead loads and much more needs to be determined. These buildings can be adapted to suit a wide range of structural applications, which leads to potential savings in the area of a structural framework as well. Let’s take a look at the components of a Pre-Engineered Building: #1 – Main Frame or Vertical Columns: The mainframes consist of rigid steel frames of the building. These steel frames are made of tapered columns and tapered rafters. They are fabricated using state of the art technology at BRPL, while the flanges of the same are welded. Also Read: How To Maintain PEBs; A Simplified Explanation #2 – End Wall Framing: An end wall framing is designed as a main rigid frame. The beam end wall system of framing consists of columns with pinned ends and these supporting the horizontal rafters are known as end wall rafters. #3 – Purlins, Girts and Eave Struts: These are secondary components of a PEB. In this preparation, there is no need for welding. They are prepared by wielding the steel coil in order to give the same desired shape. The Z shape is for purlins and girts and the C-shape is for eave struts. #4 – Crane System: The crane system is utilized to improve material handling productivity hence allowing more utilization of space by reducing traffic due to forklifts. The runaway beams of the crane are supported via built-up sections with the cap channels. Also Read: How To Choose The Best PEB Contractor For Your Steel Buildings Manufacturing #5 – Sheeting and Insulation: The sheets made of steel are galvanized profile sheets that are permanently coated with colour. These sheets are coated with special paints to enhance their anti-corrosion properties. They are insulated through insulation slabs and the steel sheets are fixed on top of the same as roofing steel sheets. #6 – Mezzanine System: The mezzanine system is a framing system that consists of a black deck supported by joists framed into the main mezzanine beams. #7 – Paints and Touches: Pre-painted steel is produced on a high-speed coil, painting lines where the surface preparation prior to painting and paint curing is done on a highly automated line under optimum conditions.  Let’s look at the advantages of PEB: Pre-Engineered buildings have a number of advantages the very foremost one being they reduce construction time. Here are the major advantages of PEBs: PEBs have satisfied a large range of structural and aesthetic requirements. The components used in the making of PEBs are engineered beforehand and standardized as well. The use of customized software for design and drafting reduces the speed of the project.  The design time of the PEBs is comparatively lower than that of standard buildings. Moreover, the frames of PEB’ offer higher resistance to seismic forces.  Owing to the arrival of the systems approach, there is a saving in design manufacturing as well as site erecting costs. The diagrams of PEBs are shaped in a manner that reduces the cost, weight and load to foundations.  Pre-Engineered Buildings are 30-35% lighter than conventional steel structures as they are made up of simple designs and are easier to construct.  Bansal Roofing provides the complete PEB package, hence availing PEB services from a single vendor assures compatibility and quality of components.  PEB has the capacity to endure weather conditions and has one of the highest durability. PEBs often come with the best warranties in the construction industry.  Bansal Roofing Products Limited is the proud pioneer of durable, high-quality Pre-Engineered Buildings. We have never been charged with a penalty for late delivery and we ensure timely delivery for our PEB services.

Why are Steel Structure Buildings Recommended?

The results that steel can produce as a material in steel buildings in terms of structure and beauty are really inspiring and resourceful. While many architects have challenged the idea of using only steel to construct the skeleton of a building, modern architects are creating fluid and innovative designs using steel from its rust texture to polishing it for a high shine finish. Generally, steel structures are used owing to characteristics like: • Substantial elimination of delays due to weather• No need for form work• Termite and rot proof• Uniform quality• Economic in transportation and handling• High strength and stiffness per weight• Long Spans (i.e. large column-free area span)• Accurate detailing• Non-shrinking and non-creeping at ambient temperature• Ease of fabrication and mass production including production and hence better quality control Since steel structures have the following characteristics they are used extensively and have better chances of durability owing to high strength and uniform quality along with being termite and rot proof. Also Read: Why Pre-Engineered Buildings are better than onsite fabrication Let’s take a look at the advantages of using Steel in Steel Building Structures: Beauty: There is a sense of openness and liberation to the architects when using steel in building structures as it is subject to being made into stylish shapes and designs in order to create large open columns and interiors. Adaptability: Steel is a boon for architects as it can be adjusted and changed according to the whims and wishes of the architect. The frame which is made of steel can be adjusted, repositioned and can be altered as well. At the same time, steel also helps to extend the lifespan of the building structure For example, wall frames that are made from steel can be widened and a new interior layout of the building can also be created the same way! Cost-Effective: Steel is lightweight in comparison to tinder and RCC and is also easier to transport. Thus reducing the cost of transport, fuel cost, and also accelerates project schedules. Adding to these reasons is the fact that steel is energy efficient and creates minimum waste thus increasing the chances of being recycled. Ductility: Steel can be rolled, cut and shaped into the structure of the architect’s choice without any changes in composition or property. Durability: Steel is known to stand extreme weather conditions and forces like strong winds, earthquakes and the like. Steel also tends to remain unaffected by termites or fungi and bugs. When compared to wooden frames, steel structures prove to be more fire-resistant. Let’s have a look at what kind of building are steel structures used in: High Rise Buildings: Steel is used in High Rise Buildings due to its strength, lightweight, and speed of construction. Industrial Buildings: Steel is used in Industrial buildings owing to its ability to create a large span also known as column-free span spaces at a low cost Residential Buildings: Using steel in residential buildings is a practice since it is similar to wooden framed structures which in the case of steel is called the light gauge steel construction. Temporary Structures: Steel is used in temporary structures because it is easy to install and remove which serves the purpose of a temporary structure. Steel can be used in building structures owing to other reasons depending on its existing properties like the fact that a whole frame of steel can be erected in a matter of days where wooden frames may take weeks altogether hence reducing the corresponding construction time by 20-40%.  Steel framing and floor systems also allow easy access and the ability to make alterations to existing electrical wiring, computer networking cables and communication systems. Steel built building structures are also more adaptable and have greater potential for alterations that can be made over time while extending the lifetime of the structure.  

Benefits of Turbo Ventilators on Your Roof

You must have seen the rotating round equipment on industrial roofs. They are called turbo ventilators or eco ventilators whose purpose is to help to vent the hot air from inside the premises into the atmosphere. Turbo ventilators are self-driven equipment installed on the roofs to extract inside air. They don’t require additional energy as they are operated by the atmospheric wind and in doing so, inside air is exhausted through it and the natural inward flow of fresh air is boosted. Despite appearing a little complicated at the first glance, it is a piece of fairly simple equipment with minimum parts but provides a significant number of benefits. Let’s have a look at them. Provide effortless ventilation: As the name suggests, a turbo ventilator provides easy ventilation for all structures and help in moving damp, moist air outside the building which could otherwise cause damage to equipment used in the building. Accumulation of moisture and dampness can cause rusting in metal equipment and can provide a favourable environment for different kinds of bacteria and fungi. Turbo ventilators allow the circulation of fresh air in the premises and prevent damages caused by mould, fungi and moisture. Also Read: The Advantages of Installing Skylight in Building Use less space: Turbo ventilators on roofs consume lesser space compared to other methods of ventilation and they are much more effective. Comparatively, other ventilations like ridge vents require more space and are not as effective. Turbo ventilators are flexible and can be placed at almost any optimum place on the roof. Don’t require additional energy: Turbo ventilators are completely self-driven and don’t require any energy source like electricity. They are operated by the wind and can keep running endlessly without supplying any energy. Even slight wind on the rooftops is enough to operate it. This way they result in huge cost savings.     No breaking down: The simple rounded design of turbo ventilators makes them modest equipment with the least amount of parts. Hence they don’t face failure much often and are only affected by large debris or huge storms. With minimal maintenance and oiling, they can keep going for years before you need to replace them. Turbo ventilators are very helpful ventilation equipment. However, it is important to note that they can be affected by frequent storms which can damage them and make them prone to rusting. Sometimes, a little friction may also make them noisier which can be solved by regular oiling. Otherwise, they are very reliable equipment that can keep working without supervision. Turbo ventilator installation is however a little tricky and requires precision cutting on roofs and additional layers of sealant to prevent leakages. So it is a job best left to professionals. Bansal Roofing Private Limited are a leading supplier of turbo ventilators and can help you with the design, manufacturing as well as installation of the product according to your application. For more information, get in touch today.  

How To Choose The Best PEB Contractor
For Your Steel Buildings Manufacturing

A PEB is a cost-effective solution for your offices, exhibition halls, conference centres, factories, power plants, warehouses etc. Do you desire a flexible engineered structure that can be tailored to your specific project requirements? Then a pre-engineered steel building is one of the best options for you! A PEB Contractor or PEB manufacturer can design and customise the building just as per your requirement. Do you know that Pre-Engineering Buildings are becoming increasingly popular due to their results-oriented benefits? Its advantages are the primary cause for the construction industry’s evolution in India during the previous several decades. Pre-engineered buildings have several advantages, including cost-effectiveness, recyclability, design flexibility, quick construction, and high durability. But who will be the right person for your manufacturing of steel building? Locate a reputable roofing company in your location and start receiving better dimensional services. Finding a suitable contractor, on the other hand, is a difficult task. When looking for the BEST PEB CONTRACTOR FOR YOUR STEEL BUILDINGS MANUFACTURING, there are a few factors to keep in mind. Factors to Consider Before Choosing a PEB Contractor: #1 – Evaluate The Quality Parameters: Every PEB contractor adheres to a set of guidelines to guarantee that the quality of their work matches their price. The term “quality” refers not only to the materials used in the construction of the structure but also to all other aspects. Make sure you request the documentation that specifies the vendor’s quality assurance procedures. This will allow you to determine whether or not the vendor is adhering to the quality check standards specified in the PEB offer. Having this document on hand can also assist the customer in the future when the Pre-Engineered building project is being completed. Bansal Roofing Products Ltd adheres to stringent quality standards to ensure that our clients receive the finest possible service. Also Read: Why is a PEB the Right Choice for Your Building Construction #2 – Ensure High Quality Manufacturing Material: You must be knowing that for a Highly Durable and Strong Steel Building Structure high-quality kind of manufacturing material is important to use. So The quality of the material is the main thing is to be noted before choosing any PEB company for construction. #3 Choose An Established & Experienced PEB Company: When it comes to choosing the right PEB contractor, always go with an experienced PEB manufacturing business since an experienced PEB company will always have a team of trained specialists who will uphold the company’s standard of producing high-quality products utilising high-grade raw materials. Bansal Roofing Products Ltd’s qualified technical team has all you need for any type of steel structure. When difficulties emerge during the construction process, such teams can handle the situation and even advise the customer on any design changes that may be required. So always choose an established & experienced PEB Contractor. #4 – Always Verify The Past Project: It is necessary to identify and verify the types and number of projects completed by the PEB contractor. To determine whether the vendor delivers the quality of the construction materials, one needs to visit a few of the vendor’s previous Pre-Engineered Building projects. This verification aids you in determining what a PEB contractor can provide you in terms of results. It is a very reliable method of determining the vendor’s ability to deliver good value for money with their service. Also Read: Why Pre Engineered Buildings Are Better Than Onsite Fabrication #5 – Availability of Tailor-Made Solutions: Pre Engineered Building (PEB) is a concept of building with high structural strength and an inexpensive design that overcomes traditional fabrication and reduces foundation stress, resulting in cheaper civil construction costs. But, Every client has a unique set of requirements and design calculations, thus it’s critical that you achieve the PEB structure you desire. Before you choose a PEB contractor, be sure it can meet all of your needs and provide you with a specific tailor-made solution. BANSAL ROOFING is well-equipped to construct Pre-Engineered Buildings in accordance with your specifications. We have all of the most up-to-date equipment. The whole design of Columns, Rafters, and other Accessories is based on worldwide structural standards, with high-tech welding and high-quality manufacturing. Keep these five essential elements in mind while looking for a PEB vendor for your next steel construction project, and we hope that they will prove to be useful and valuable. For contractors and investors, pre-engineered steel structures are the most versatile option. Many contractors and engineers that specialize in the use of traditional steel structures have lately moved to the usage of pre-engineered steel buildings.  Bansal Roofing as a PEB contractor claims to meet your requirements in a Timely and Cost-effective manner. Remember that having the appropriate contractor not only speeds up the construction process but also makes it run more smoothly. So choose accordingly.

Why is a PEB the Right Choice
for Your Building Construction

PEB (Pre-Engineered Buildings) is one of the fastest methods used in the construction of Iron/Composite buildings presently. A PEB manufacturer can complete the entire building within a time frame of a few weeks to just a couple of months depending on the scale of the project. This is primarily because a PEB can be constructed much sooner than a conventional building and is comparatively less expensive.  If you are looking to construct a building for your industrial/office purpose or personal need, a PEB is the best choice to consider. There are various advantages associated with PEB which we will discuss below. Advantages Associated with PEB Structure for Building Construction: #1 – Cost Saving: Needless to mention, one of the most important factors to consider before planning your building construction is the budget you’re going to spend and how much value you’re going to get out of it. For a building to provide great value for money, it must fulfil all your requirements while not putting a hole through your pockets.  A Pre Engineered Buildings (PEBs) is considerably cheaper to construct than traditional concrete buildings. There is a precise amount of material used because it is designed before the actual construction takes place and all load calculations are made beforehand. This ensures you are only spending as much as is required. Also, the amount of labour required to construct a PEB is significantly less so you don’t need as much manpower to build a PEB which saves your costs again. Also Read: Is a Pre-Engineered Building Right for Your Next Project? #2 – Flexible Design: The design and calculation of a PEB are already done before actual construction which enables you to build it according to the available space and the application. On top of that, even after construction, you can keep adding elements to the building as your requirement keeps changing. You can extend it as you like or add any accessories you want or remove something you don’t need. A PEB supplier can do all of this pretty easily in the future which gives you great flexibility in terms of design and occupancy. #3 – Recyclable Buildings: If in any case, you need to demolish your building, a concrete building will only leave you with endless rubble and barely any reusable components. Basically, your entire investment is turned to ashes. But in the case of a PEB, the entire structure can be dismantled and be transferred elsewhere if you need it. Alternatively, if you have no use for it since it is a metal building you can also recycle the parts for other applications. Steel is a widely recycled material and can be recycled without any loss of properties. Also Read: 5 Reasons Why Bansal Roofing is The Best Choice For PEB Manufacturer #4 – Green Construction: PEB is made using steel and there are no harmful chemicals or toxins involved in the construction process. There is no chemical dust to hurt the eyes or lungs. It is a form of green construction that is environmentally friendly and poses no risk to health. It does not pollute and does not harm the workers on site. PEB buildings can be fittingly called green buildings. There are numerous advantages associated with PEB that makes them the ideal choice for building construction. If you’re looking for a PEB manufacturer, look no further, because Bansal Roofing Products Ltd has plenty of rich experience in PEB manufacturing and is the leading supplier of PEB and associated materials. We can understand your requirements closely and design and construct a PEB that suits your application best. The best part is that Bansal makes 97% PEB Components inhouse and hence no dependability on suppliers. We are committed to completing the project in time.

Advantages of Sandwich
Puf Panel Sheets in Buildings

PUF panels are sandwiched panels made of polyurethane which is usually sandwiched between two metal sheets. Sandwich puf panels are widely used in steel structures in the present day due to their various advantages. PUF panels are also available in different sizes depending on the requirement and a PUF panel supplier or PUF panel manufacturer should be able to design them according to your specifications. A PUF panel’s core is made of polyurethane while the interior and exterior are made up of thin metal sheets. This gives them excellent heat and sound resistance and insulating properties. Due to these reasons, they are commonly used in the construction of various structures such as airports, exhibition halls, cold storages, auditoriums etc.  PUF panels save energy costs while increasing the performance of a structure. The following are some of the advantages of sandwich puf panel sheets. Benefits of Sandwich Puf Panel Sheets: #1 – Energy Savings Due to Low Thermal Conductivity: PUF panels are good heat insulators so they can protect the inner environment from ambient heat and sunlight and can keep the indoors cool. This means lesser energy will be used to keep the premises inside the structure cool which can save costs incurred in indoor cooling during hot weather. Similarly, if the temperature outside is low, the PUF panels can retain the heat inside the structure to keep it warm and comfortable inside. So PUF panels are an ideal choice for industries and offices. Also Read: How To Select Roofing Sheet #2 – Reduces the Effect Of Noise Pollution: Due to the sandwiched structure of the PUF panels, they act as good acoustic shields. So, they don’t let the noise pass through and can protect the inner environment from outside noise. This is very beneficial in structures that are located closer to busy roads, highways or construction sites where noise pollution is heavy.  This property is also useful in the construction of auditoriums or theatres where acoustics play a very important role. #3 – Weather Resistant: PUF panels are resistant to extreme weathers such as winds, rainfall or snow and can keep the indoors protected from environmental effects. They are also resistant to corrosion so this kind of structure requires less maintenance as it can withstand adverse climates. This makes them easy to use in structures built on any kind of geographical location. Also Read: 5 Reasons Why Bansal Roofing is The Best Choice For PEB Manufacturer #4 – Lighter and Easier To Install: PUF insulated sheets are generally lighter compared to their size and so can be moved around easily. It also makes handling them on the site easier where they are supposed to be installed. So, the installation can be done with comparatively less manpower. This in turn brings down the combined construction cost of materials and labour which results in more savings. #5 – Durable and Inexpensive: As Sandwich PUF panels require very little maintenance and can withstand all kinds of weather, they are extremely durable and have a long life. They are ideal for structures that are built to last for a long time. At the same time, they are not very expensive so it’s a great choice for all kinds of construction projects. PUF panels have found widespread usage in construction today due to their numerous advantages. Their aesthetic appeal, as well as design potential, make them an ideal choice for architects. Additionally, their acoustic properties give them an edge over other roofing materials in construction. Bansal Roofing Products Ltd. is the best manufacturer of PUF panel sheets in Vadodara, Gujarat. We provide sandwich PUF panels that are suitable in different sizes and shapes according to the application. Our PUF panels are manufactured using the best materials and are of high quality and extremely durable. Our PUF panels are ideal for all kinds of applications including roofs and walls. For all your PUF panel requirements get in touch with Bansal Roofing today.

The Advantages of Installing
Skylight in Building

A Skylight or a Roof light is a transparent/translucent sheet installed on the roof of a building that is used for natural lighting purposes. Skylights are used in residential as well as commercial buildings due to their various advantages. They improve the indoor aesthetics of the building and also help in energy savings.  Skylights have thus become an important part of the building and can be found in most industries and commercial spaces. Below are a few advantages of having a skylight in your building. Advantages of Having Skylight in Building: #1 – Improve Occupants’ Well-being: Skylights allow natural sunlight to come into the building which is used to illuminate the space inside the building. Studies have found that daylight improves the mental well-being of employees and increases productivity. Daylight also helps keep the mood fresh and reduces stress levels. It helps with memory and mental functioning. It creates an overall positive work environment. Also Read: How To Install Roofing Sheets #2 – Increases Energy Savings: Natural light is the best source of lighting in any environment. By installing skylights, you can use natural sunlight to illuminate the work environment and consequently reduce the use of artificial lighting. This can result in tremendous energy savings.  Now it might appear that allowing sunlight inside the premises can result in generating more heat and eventually add more cost in cooling the environment. But using well-insulated skylights can block the heat entering through the environment and only allow natural light to pass in so barely any heat can pass through. On the contrary, if you don’t have provisions for natural lighting, then artificial lighting equipment can actually generate a considerable amount of heat which increases the cooling costs of the building. So, installing a skylight can reduce lighting costs as well as cooling costs of your building. This helps in massive cost savings. #3 – Reduce Illnesses: A damp environment that is devoid of sunlight can breed all kinds of diseases. Installing skylights improves the physical health of employees and helps them stay fresh and energetic. Natural lighting also minimises symptoms of depression and anxiety. So, allow as much light to come into the building premises as possible. #4 – Improve the Aesthetics of the Building: Natural lighting makes your building look spacious from the inside and eliminates any claustrophobic feeling. Spacious buildings attract more value and look much more aesthetically pleasing. If your space is relatively small, adding a skylight can make all the difference. It can help you make your premises look more attractive and hospitable.  A welcoming environment can light up the day of any visitor and instil positive emotions in them about your company. Of course, a positive feeling can turn into more business for you. So, install a skylight to improve the value of your building by making it look more attractive and substantially spacious. Also Read: Important Roofing Accessories That You Need For Your Roof Materials Being Used in Skylight:  #1 – Polycarbonate: Polycarbonate is the most common material used worldwide for sky lighting. It has high strength and   U.V. Coating on the top surface makes it more durable against harmful rays of sunlight. Polycarbonate is strong and gives minimum 10-year life. Bansal Roofing Products Limited provides you best quality moulded and cold-bent polycarbonate sheets in various profiles.  #2 – GRP (Glass Reinforced Plastic): GRP is a wonder material and is translucent while using powder bonded glass chopped mate with resin. It can be made U.V. resistant by adding U.V. substance. It is cheaper than Polycarbonate but has a little lesser life as the resin used is volatile and gets evaporated in sunlight.  #3 – Glass: Toughened glasses are used at many places specially to allow north light. North lights Sheds are most common in an engineering factory. Glasses are used at airports, High Rise Buildings etc. for daylight to come in.  #4 – Louvers: “S” Type louvers are also used for daylight and natural air to come into the building. Fix louvers and adjustable louvers are being used depending upon the requirement. Bansal Roofing Products Limited is an expert in making louvers for good ventilation and natural light to come into the building. Bansal Roofing Products Limited has years of experience in the roofing industry and is one of the best roofing sheets and accessories manufacturers in Vadodara, India. Contact us for any help with the supply and the installation of roofing sheets and accessories.

Why Pre Engineered Buildings
Are Better Than Onsite Fabrication

It might appear that carrying out onsite fabrication of a steel building would be an easier and cheaper way to go about a construction project than having a pre-engineered building developed and built by a professional PEB manufacturer. Despite what it looks like, Pre-Engineered buildings have a ton of benefits which can help you save your time and money when compared with onsite fabrication. Let us look at some of them here. Benefits of Pre-Engineered Buildings (PEB) Structure: #1 – PEBs (Pre-Engineered Buildings) Are Lighter: It is a well-known fact that PEBs are much lighter than conventional buildings, but it is also worth noting that due to the specific customisation of parts Pre-Engineered buildings are even lighter than onsite fabricated structures. When you carry out onsite fabrication you must procure materials from the market like sections and gurters which are available in standard sizes only. Your structure has to be built around them and carrying out the optimisation gets very difficult. However, in the case of PEBs, this customisation is already carried out at the design stage even before assembling the parts which enable the building to be made considerably lighter. Also Read: Important Roofing Accessories That You Need For Your Roof #2 – Lower Cost Of  Building: Let us talk about one of the most important criteria, that is cost. Pre-Engineered Buildings are an extremely cost-effective solution when it comes to building construction. The fact that PEBs are lighter when compared with onsite fabricated buildings means a significantly lower cost in comparison. As the building gets heavier the civil foundation cost also goes higher. When it comes to PEBs, the civil foundation cost is much lower which in turn decreases the entire cost of the project. Also, during the construction of a Pre-Engineered Building since the calculations are done much in advance you can have a much closer estimate of the cost of the entire building as other parameters like fabrication, welding, painting etc. are considered and fixed, whereas in the case of an onsite fabrication whereas in an onsite fabrication project you must make separate calculations for the per kg cost of the steel and then fabrication, welding, and painting. In addition to that, you will also have to include the wastage of the raw material which can be anywhere between 7-8% by the time the project is complete. With PEBs this wastage of raw materials can be avoided easily as the entire structure is prefabricated after performing all the calculations. This enables significant cost savings. #3 – On-Time Delivery: Giving the project to a PEB manufacturer means they can take end to end responsibility i.e from sourcing the materials to the construction of the building. This helps in maintaining strict delivery times as a PEB manufacturer can have multiple sources set up for the materials and can take care of lead times more effectively. This also helps save the raw materials from degradation because without proper planning you would end up buying a lot of the raw material when it is not required and then just dump it until your project reaches the stage where it becomes useful. Storage of raw materials for such longer periods can cause degradation and, depending on the climatic conditions in the area, can also cause rusting. A PEB manufacturer is well equipped for such circumstances and can keep the raw material safe or else procure it systematically according to the plan as and when it is required. Also Read: Know The Components of PEBs Structure #4 – Better Quality: A PEB manufacturer like Bansal Roofing can always assure you of the highest quality standards as we maintain strict quality checks on our premises. PEBs are designed and fabricated in controlled environments which allows a PEB manufacturer to personally check and ensure its quality. The incoming raw material is also passed through a quality check and if it doesn’t meet the required standards it is rejected. The consistency of welding and painting is also subject to a high level of scrutiny under expert supervision before it is dispatched for assembly. #5 – Ease of Installation: PEBs are famous for their ease of installation. Their assembly process is very simple and can be accomplished by fastening nuts and bolts on site. This also helps in completing the structure much faster when compared to onsite fabrication. Since the parts are manufactured in the factory while maintaining precision, it is easier to assemble them on the site without mismatching parts. The numerous benefits of Pre-Engineered Buildings make them the right choice for steel building construction rather than onsite fabrication. PEBs are cheaper, stronger, easier to assemble and can be constructed much faster. Bansal Roofing is a leading manufacturer of PEBs and has years of experience in the field without a single delay in any of the projects.

Is a Pre-Engineered Building
Right for Your Next Project?

Pre-engineered buildings are a modern and cost-effective choice in construction. Pre-engineered steel buildings offer unparalleled versatility and can be constructed way faster than traditional structures. But is a pre-engineered building or PEB right for your next project? To know that let’s first understand what exactly a pre-engineered steel building or a PEB is. What is a Pre-Engineered Building? A pre-engineered steel building is a portable building that can be manufactured in a factory. The building can then be assembled on site. This flexible assembly style of construction enables it to be designed as per the available space and conditions at the site. The sizing and selection of material can be done keeping in mind the climatic conditions and terrain of the site. This provides huge benefits in improving the life of the structure. Steel as a material provides strength and durability to the building. In addition to this, it is also resistant to harsh weather and is environmentally friendly. Since pre-engineered steel buildings are manufactured in the factory and can be customised according to the available space at site, they prove to be extremely space-efficient. Also Read: What is a Steel Building – Advantages and Applications Why is a Pre-Engineered Steel Building the right choice? PEBs come with loads of benefits and are perfect value for money. They are highly customisable and provide long term benefits. PEBs are durable and can resist all kinds of weather conditions. As they are manufactured in a factory and assembled at the site, the construction time is greatly reduced which allows projects to be completed within a short duration. This also helps in cutting down labour costs as the amount of labour work required on-site is considerably reduced. Due to all such advantages, the cost for construction of a PEB is much lower than traditional concrete buildings. The shape of I-beams used in Pre-Engineered Buildings is specifically designed to carry extreme loads which enhances the quality of the entire frame. As load requirements are considered before even starting construction, it allows for building an efficient structure. Types of Pre-Engineered Steel Buildings: Due to their versatile applications, Pre-Engineered Buildings are a great choice for any kind of construction requirement ranging from large factories to warehouses. Choosing the right material for your application is also quite important before initiating the project as the climatic conditions on site can affect the life of the building. Industrial Buildings: When it comes to the construction of Industrial Buildings it is important to consider space requirements for various operating machinery and personnel. Also, most industries require cranes for moving heavy parts and machinery. So, the structure should be built considering the space and integration of cranes. The process of designing a pre-engineered building makes it possible to consider all such things before construction. Commercial Buildings: Such facilities need a quick and smooth flow of operations for day-to-day activities while maintaining an attractive interior and exterior layout. Pre-Engineered Buildings help in maximizing space and efficiency for any commercial business. With the help of PEBs, it is also possible to make future expansions to the buildings easily without affecting the existing structure. Also Read: 5 Reasons Why Bansal Roofing is The Best Choice For PEB Manufacturer Office Buildings: Buildings which are built for office space are meant to be completed quickly so that the occupants can move in as soon as possible to get the business up to speed and running. The flexible nature of a PEB and its construction process makes it possible to complete it within a short duration. Project timelines can be met without delays and the building can be occupied much sooner. Also, various other office requirements like conference rooms, storage etc can be incorporated easily into the building. Recreational Buildings: Recreational or sports buildings require large areas, sometimes with adequate seating space. It is also desired to have dedicated areas for lockers, food service etc. With pre-engineered buildings, it becomes easy to consider all these aspects and construct a building that meets all these requirements. A pre-engineered building is the perfect choice for all kinds of applications and can be built according to the requirement of the project. Specific traits of PEBs like durability, flexibility and ease of construction make it a desirable option when it comes to constructing any modern building in today’s world. Additionally, they have a longer life and require very less maintenance over the years compared to traditional buildings. Bansal Roofing is a leading manufacturer and supplier of Pre-Engineered Buildings in Vadodara, Gujarat. We can help you with complete construction as well as the intricate detailing of your project like material selection and customising the building as per your requirement. We use the latest cutting-edge technology and run software simulations on the structure before it is even assembled. We make all calculations and manufacturing in-house to maintain the highest quality standards that make us the best Pre-Engineered Building supplier in Gujarat. We are well equipped to fulfil all kinds of PEB requirements and can provide customised Pre-Engineered Buildings as per the application.