Pre-Engineered ConstructionvsConventional Construction
With every passing day, we are witnessing the future of construction and it is sustainable, more durable and more efficient than what we have been working with. Pre-Engineered Buildings are one such boon that has now occurred in the construction industry. What are Pre-Engineered Buildings? A Pre-Engineered Building is metal construction that consists of light gauge metal standing seam roof panels on steel purlins between rigid frames along with light gauge metal wall cladding. These buildings reduce construction time and are extremely low in maintenance. One can think of Pre-Engineered Buildings as a puzzle, the pieces of which are not made on-site unlike conventional construction but are delivered from the manufacturer and assembled by the workers to construct a building. Bansal Roofing makes 95% of components of PEB in-house, having very less dependency on others hence completing 100% projects in time. Bansal Roofing is well equipped to produce Pre-Engineered Buildings (PEB structures) as per the client’s requirements. The company has all the latest machinery to support this segment. The entire design of Columns, Rafters and other Accessories is based on international structural standards and invoices, high technical welding and quality production. There is a lot of difference between PEB and Conventional buildings; however they both are constructed on the principles of foundation, design, framing and finishes. Also Read: Why are Steel Structure Buildings Recommended? Conventional Construction: Conventional construction is a step-by-step process which ranges from excavation to ultimate finishes. Every step has to be completed before moving to the other and complex designs often result in the delay of schedule. Since there are many steps involved, the cost of labour is more as well and the production waste involved is toxic for the environment. However, the fact that conventional constructions offer design flexibility cannot be ignored. While design flexibility requires careful maintenance, the foundation of a conventional construction depends heavily on the material used. When it comes to pre-engineered buildings, every component is fabricated separately to suit the design and the design creates a standard connection between all the parts. When they are delivered on-site it becomes easy and efficient for the laborers to put together a structure. Moreover, pre-engineered buildings have a quick turnaround and Bansal roofing holds the proud accomplishment of completing PEB projects on time. Conventional buildings take a maximum of 6 to 9 months in terms of construction. This is one of the major reasons for a drastic shift towards pre-engineered buildings. Also Read: Most Common Differences Between Commercial and Residential Roofing While conventional constructions have been in existence for a long time, pre-engineered buildings can be used for the same purposes at a more efficient effect on the environment, cost and time. From factories and airports to stadiums and community halls, PEB’s have made their mark in all areas of construction. Pre-engineered buildings lower the cost of construction, produce lesser waste and are known to be low maintenance along with high durability and ease of expansion. It is essential to check your project type and consult an efficient pre-engineered building manufacturer to meet your requirements. Bansal Roofing has years of experience with manufacturing PEB buildings catered precisely and timely according to the needs of the customers.
5 Reasons To ConsiderColour Coated Roofing Sheets
Having a roof over our heads is the thing we are most grateful for! Even when we put the metaphors aside, and take construction into view, a roof is one of the most important parts of a construction structure. It is very important to have a roof that is strong and durable and protects everyone from any natural calamity or weight it has to bear. It is also equally necessary to choose the right kind of colour coated roofing sheet manufacturer for your project. A roof not only protects but also adds to the exterior aesthetics of the house. Of late there have been many changes in the types of construction accessories like a roof. Roofing sheet suppliers have introduced various types of roofs. Now one can choose them suiting the external aesthetics of their home. One such type of roof out of the many choices available are colour coated roofing sheets. Earlier, there existed traditional roofs made of metal that were used in construction but with changing time and development in construction technology, people started opting for more aesthetically pleasing roofs like the colour coated roofs. These roofing sheets have replaced the galvanized iron sheets for residential as well as commercial applications. Bansal Roofing offers roofing sheets in different colours, sizes, and shapes. We have successfully installed colour coated roofing sheets at various places like officers, car-parking areas, warehouses, manufacturing industries, etc. Apart from adding aesthetic value to a place, there are several other advantages of color coated roofing sheets. Advantages of Colour Coated Roofing Sheets: #1 – Weather Resistant: The quality of these sheets remains unaffected in extreme weather conditions. They are strong enough to withstand extreme weather as well as protect the establishment from heavy rainfall, hailstorms or strong winds. #2 – Environment Friendly: These roofing sheets are 100% recyclable and can be turned into new products after melting. This advantage makes them environment friendly and helps in saving natural resources. Also Read: Top 9 Advantages of Aluminum Roofing Sheets #3 – Durability: Color coated roof sheets by Bansal roofing have become a popular choice in the construction industry because of their durability. These roofing sheets can last for many years with an intact colour and also require low maintenance. Colour coated roofing sheets undergo a special chemical treatment during the manufacturing process owing to which they become water repellant and colour fade proof. #4 – Appealing to the Eye: Colour coated roofing sheets add to the aesthetic of a construction. Whatever the theme of the establishment may be, these sheets will add an appeal to it. People may customize them based on size, colour, and shape of the roof according to their needs. Also Read: How To Select Roofing Sheet #5 – Lightweight: One of the advantages of colour coated roofing sheets is that they are light in weight which makes them easily transportable to the construction site. Moreover, they do not put or add to the pressure on a construction establishment and are also easy to install. Bansal Roofing Products Ltd. is an experienced colour coated roofing sheet manufacturer and ensures high and premium quality color coated roofing sheets in addition to an array of PEB and roofing material and services. It is our mission to supply a wide range of components and services for Pre Engineered Steel Structures/Buildings and Roofing Sheets along with Accessories to meet Customers’ requirements; to ensure that the products are of excellent quality, value for money which will instil confidence in owners; and to create added value for customers with innovative ideas for products and solutions.
Why are Steel Structure Buildings Recommended?
The results that steel can produce as a material in steel buildings in terms of structure and beauty are really inspiring and resourceful. While many architects have challenged the idea of using only steel to construct the skeleton of a building, modern architects are creating fluid and innovative designs using steel from its rust texture to polishing it for a high shine finish. Generally, steel structures are used owing to characteristics like: • Substantial elimination of delays due to weather• No need for form work• Termite and rot proof• Uniform quality• Economic in transportation and handling• High strength and stiffness per weight• Long Spans (i.e. large column-free area span)• Accurate detailing• Non-shrinking and non-creeping at ambient temperature• Ease of fabrication and mass production including production and hence better quality control Since steel structures have the following characteristics they are used extensively and have better chances of durability owing to high strength and uniform quality along with being termite and rot proof. Also Read: Why Pre-Engineered Buildings are better than onsite fabrication Let’s take a look at the advantages of using Steel in Steel Building Structures: Beauty: There is a sense of openness and liberation to the architects when using steel in building structures as it is subject to being made into stylish shapes and designs in order to create large open columns and interiors. Adaptability: Steel is a boon for architects as it can be adjusted and changed according to the whims and wishes of the architect. The frame which is made of steel can be adjusted, repositioned and can be altered as well. At the same time, steel also helps to extend the lifespan of the building structure For example, wall frames that are made from steel can be widened and a new interior layout of the building can also be created the same way! Cost-Effective: Steel is lightweight in comparison to tinder and RCC and is also easier to transport. Thus reducing the cost of transport, fuel cost, and also accelerates project schedules. Adding to these reasons is the fact that steel is energy efficient and creates minimum waste thus increasing the chances of being recycled. Ductility: Steel can be rolled, cut and shaped into the structure of the architect’s choice without any changes in composition or property. Durability: Steel is known to stand extreme weather conditions and forces like strong winds, earthquakes and the like. Steel also tends to remain unaffected by termites or fungi and bugs. When compared to wooden frames, steel structures prove to be more fire-resistant. Let’s have a look at what kind of building are steel structures used in: High Rise Buildings: Steel is used in High Rise Buildings due to its strength, lightweight, and speed of construction. Industrial Buildings: Steel is used in Industrial buildings owing to its ability to create a large span also known as column-free span spaces at a low cost Residential Buildings: Using steel in residential buildings is a practice since it is similar to wooden framed structures which in the case of steel is called the light gauge steel construction. Temporary Structures: Steel is used in temporary structures because it is easy to install and remove which serves the purpose of a temporary structure. Steel can be used in building structures owing to other reasons depending on its existing properties like the fact that a whole frame of steel can be erected in a matter of days where wooden frames may take weeks altogether hence reducing the corresponding construction time by 20-40%. Steel framing and floor systems also allow easy access and the ability to make alterations to existing electrical wiring, computer networking cables and communication systems. Steel built building structures are also more adaptable and have greater potential for alterations that can be made over time while extending the lifetime of the structure.
Benefits of Turbo Ventilators on Your Roof
You must have seen the rotating round equipment on industrial roofs. They are called turbo ventilators or eco ventilators whose purpose is to help to vent the hot air from inside the premises into the atmosphere. Turbo ventilators are self-driven equipment installed on the roofs to extract inside air. They don’t require additional energy as they are operated by the atmospheric wind and in doing so, inside air is exhausted through it and the natural inward flow of fresh air is boosted. Despite appearing a little complicated at the first glance, it is a piece of fairly simple equipment with minimum parts but provides a significant number of benefits. Let’s have a look at them. Provide effortless ventilation: As the name suggests, a turbo ventilator provides easy ventilation for all structures and help in moving damp, moist air outside the building which could otherwise cause damage to equipment used in the building. Accumulation of moisture and dampness can cause rusting in metal equipment and can provide a favourable environment for different kinds of bacteria and fungi. Turbo ventilators allow the circulation of fresh air in the premises and prevent damages caused by mould, fungi and moisture. Also Read: The Advantages of Installing Skylight in Building Use less space: Turbo ventilators on roofs consume lesser space compared to other methods of ventilation and they are much more effective. Comparatively, other ventilations like ridge vents require more space and are not as effective. Turbo ventilators are flexible and can be placed at almost any optimum place on the roof. Don’t require additional energy: Turbo ventilators are completely self-driven and don’t require any energy source like electricity. They are operated by the wind and can keep running endlessly without supplying any energy. Even slight wind on the rooftops is enough to operate it. This way they result in huge cost savings. No breaking down: The simple rounded design of turbo ventilators makes them modest equipment with the least amount of parts. Hence they don’t face failure much often and are only affected by large debris or huge storms. With minimal maintenance and oiling, they can keep going for years before you need to replace them. Turbo ventilators are very helpful ventilation equipment. However, it is important to note that they can be affected by frequent storms which can damage them and make them prone to rusting. Sometimes, a little friction may also make them noisier which can be solved by regular oiling. Otherwise, they are very reliable equipment that can keep working without supervision. Turbo ventilator installation is however a little tricky and requires precision cutting on roofs and additional layers of sealant to prevent leakages. So it is a job best left to professionals. Bansal Roofing Private Limited are a leading supplier of turbo ventilators and can help you with the design, manufacturing as well as installation of the product according to your application. For more information, get in touch today.
How To Choose The Best PEB ContractorFor Your Steel Buildings Manufacturing
A PEB is a cost-effective solution for your offices, exhibition halls, conference centres, factories, power plants, warehouses etc. Do you desire a flexible engineered structure that can be tailored to your specific project requirements? Then a pre-engineered steel building is one of the best options for you! A PEB Contractor or PEB manufacturer can design and customise the building just as per your requirement. Do you know that Pre-Engineering Buildings are becoming increasingly popular due to their results-oriented benefits? Its advantages are the primary cause for the construction industry’s evolution in India during the previous several decades. Pre-engineered buildings have several advantages, including cost-effectiveness, recyclability, design flexibility, quick construction, and high durability. But who will be the right person for your manufacturing of steel building? Locate a reputable roofing company in your location and start receiving better dimensional services. Finding a suitable contractor, on the other hand, is a difficult task. When looking for the BEST PEB CONTRACTOR FOR YOUR STEEL BUILDINGS MANUFACTURING, there are a few factors to keep in mind. Factors to Consider Before Choosing a PEB Contractor: #1 – Evaluate The Quality Parameters: Every PEB contractor adheres to a set of guidelines to guarantee that the quality of their work matches their price. The term “quality” refers not only to the materials used in the construction of the structure but also to all other aspects. Make sure you request the documentation that specifies the vendor’s quality assurance procedures. This will allow you to determine whether or not the vendor is adhering to the quality check standards specified in the PEB offer. Having this document on hand can also assist the customer in the future when the Pre-Engineered building project is being completed. Bansal Roofing Products Ltd adheres to stringent quality standards to ensure that our clients receive the finest possible service. Also Read: Why is a PEB the Right Choice for Your Building Construction #2 – Ensure High Quality Manufacturing Material: You must be knowing that for a Highly Durable and Strong Steel Building Structure high-quality kind of manufacturing material is important to use. So The quality of the material is the main thing is to be noted before choosing any PEB company for construction. #3 Choose An Established & Experienced PEB Company: When it comes to choosing the right PEB contractor, always go with an experienced PEB manufacturing business since an experienced PEB company will always have a team of trained specialists who will uphold the company’s standard of producing high-quality products utilising high-grade raw materials. Bansal Roofing Products Ltd’s qualified technical team has all you need for any type of steel structure. When difficulties emerge during the construction process, such teams can handle the situation and even advise the customer on any design changes that may be required. So always choose an established & experienced PEB Contractor. #4 – Always Verify The Past Project: It is necessary to identify and verify the types and number of projects completed by the PEB contractor. To determine whether the vendor delivers the quality of the construction materials, one needs to visit a few of the vendor’s previous Pre-Engineered Building projects. This verification aids you in determining what a PEB contractor can provide you in terms of results. It is a very reliable method of determining the vendor’s ability to deliver good value for money with their service. Also Read: Why Pre Engineered Buildings Are Better Than Onsite Fabrication #5 – Availability of Tailor-Made Solutions: Pre Engineered Building (PEB) is a concept of building with high structural strength and an inexpensive design that overcomes traditional fabrication and reduces foundation stress, resulting in cheaper civil construction costs. But, Every client has a unique set of requirements and design calculations, thus it’s critical that you achieve the PEB structure you desire. Before you choose a PEB contractor, be sure it can meet all of your needs and provide you with a specific tailor-made solution. BANSAL ROOFING is well-equipped to construct Pre-Engineered Buildings in accordance with your specifications. We have all of the most up-to-date equipment. The whole design of Columns, Rafters, and other Accessories is based on worldwide structural standards, with high-tech welding and high-quality manufacturing. Keep these five essential elements in mind while looking for a PEB vendor for your next steel construction project, and we hope that they will prove to be useful and valuable. For contractors and investors, pre-engineered steel structures are the most versatile option. Many contractors and engineers that specialize in the use of traditional steel structures have lately moved to the usage of pre-engineered steel buildings. Bansal Roofing as a PEB contractor claims to meet your requirements in a Timely and Cost-effective manner. Remember that having the appropriate contractor not only speeds up the construction process but also makes it run more smoothly. So choose accordingly.
5 Tips for Pre MonsoonMaintenance Of The Roof
The monsoon season is here and it comes as a welcome relief from the long and scorching summer. However, this beautiful change of seasons brings its own set of problems. Humidity, flooding, seeping to name a few. Rainwater and moisture not only affect the roads but also buildings and homes. The roof of our structure no matter whether it is residential or industrial protects it from heavy rains, winds or storms. The roof protects the structure from water damage and keeps the indoors safe. So, if any water were to creep in through the roof, it could have disastrous effects on the building. This is why it is a good idea to make sure your roof is always prepared to withstand the rains before the arrival of the monsoon season. Here are some tips you can follow for pre-monsoon maintenance of the roof. Roofing Tips for Pre Monsoon Maintenance Of The Roof: #1 – Inspect for Leaks and Fix Them: Before the beginning of the rainy season make sure to check your roof for any leaks. Leakages could be caused due to various reasons like blocked drainage, stagnant water, fungal growth etc. Over time this stagnant water could penetrate through the roof and enter the building. Always inspect your roof for leaks and get them fixed at once before it can cause any severe damage to the rest of the roof or the building. Also Read: Most Common Differences Between Commercial and Residential Roofing #2 – Clear Debris and Fungal Growth: Debris stuck in corners and gaps on the roof not only compromise the aesthetic of the roof but also damage the roof in the long run. Also, these may lead to the growth of fungus which will degrade the quality of the roof further and will make the roof weaker. It is important to check the roof for stuck debris regularly to prevent damage but take special care in the monsoon and clean the roof thoroughly using organic sprays. #3 – Clean The Gutter: Blocked and unclean gutters can cause water to accumulate on the roof which will again lead to fungal growth on the roof. Leaves and debris usually get collected in the gutter which blocks the path meant for smooth water drainage. It is important to keep the drainage path for rainwater clean to prevent any accumulation of water and to ensure there are no leakages. #4 – Ensure Flashings are Covered: The flashing is a part of the roof that is susceptible to damage over time due to its position. Damaged flashings around chimneys, skylights, vents etc. are a common reason behind leakages in roofs. Check for any damages in and around flashings and get them fixed immediately. Also Read: Types of Steel Deck used in Green Building Construction #5 – Hire a Professional Roofing Contractor: If the damage is big or the roof is old, it is best to have a professional roofing manufacturer or roofing contractor look at it. Get an inspection from a qualified supplier who can identify various problems such as leaks, structural problems, flashing damage etc. that could cause extensive damage to your roof in the long run. Bansal Roofing Products Ltd. is a leading roofing sheet manufacturer with plenty of experience in the field. We take care of end-to-end roofing solutions and can solve all your roofing problems and can make sure your roof lasts for a long time. Get in touch today for any help related to roofing problems.
How Important Is The Shape Of YourRoof Depending On The Application?
For any construction, the type of roof designs and the materials you add to your building will change everything but we often overlook these significant architectural features. Moreover, you can also improve the energy efficiency, weather protection of your building by the type of roof that you have and provide additional storage or even an extra working space in a building. Roof geometry is something that significantly determines the quality of your metal roofing sheets. Its shape is an unlikely element that greatly influences the roof of your building, industry or infrastructure project. There are several choices to choose from, depending on your roof style, the look you are going for, and your budget. Different Shape of Your Roof Style: #1 – Saw Tooth Roof: In older factory buildings, the ‘sawtooth’ roof style is most commonly seen. A roof containing a series of ridges with dual pitches on either side is a saw-tooth roof. The steeper surfaces are glazed and face away from the equator to block direct sunlight from workers and machinery. This type of roof allows natural light into a deep side building or factory. The sawtooth roof blocks the light and heat of direct sun exposure with its glass panels faced away and offers a uniform light. These styles of roofing can be difficult and challenging and require experienced roofing manufacturers. It is especially useful in construction, such as factories, manufacturing buildings and textile plants. Also Read: Why Pre Engineered Buildings Are Better Than Onsite Fabrication #2 – Flat Roofs: It is used in commercial flat roofs and mostly made of metal roofing sheets. Due to its reflective properties, this can help decrease energy waste from cooling costs. In concrete buildings, maintenance and drain cleaning are simpler because workmen can walk safely regardless of weather conditions. It is mostly used for single-storey factories or factories that cover landfills and are widely spread over the areas. Manufacturing plants where heavy machinery is required for processing. #3 – Low-Sloped Roofs/ Bell Roof: Bell can have both concave and convex curves and conical fancy designs are also available for others. The curving design can be difficult for vertical seam metal roofs to construct. But horizontally-run metal shingle roofs are typically easy to achieve. However, one concern is that the roof can sometimes have a really low pitch. Low-sloped roofs give roofers simpler and safer conditions than high-pitched roofs or steep slope roofs to function on. In factories, warehouses, apartment buildings and other industrial buildings, low-sloping roofs are often used. They may seem to be flat at first, but they have a slight pitch. In order, to avoid the inflow of water, the roofs are constructed with a light pitch. And it can be used in areas with high winds and heavy rain. Also Read: How To Install Roofing Sheets #4 – Gable Roof: In those parts of the world with cold or temperate climates, a gable roof is a classic, most frequently occurring roof type. It consists of two roof parts sloping in opposite directions and placed to shape the roof ridge in such a way that the highest, horizontal edges meet. Also, working on a steeply pitched hip roof can be very time consuming for metal roofing manufacturers. The form and detail of the gable depend on the building structure used. As it does not retain moisture, it is ideal for the construction of such warehouses and large storage buildings. #5 – Tubular Metal Roof: The trusses are structural members which consist of one or more triangular units built of the straight roof with joints referred to as nodes linking their ends. The triangular parts were arranged in series on the walls and supported. The major use of steel trusses is conducted out in the building of large-span structures such as industries, warehouses, auditoriums, movie theatres, shopping malls, concert halls, etc. The use of steel trusses, furthermore, is not restricted strictly to different types. buildings. The primary use of trusses is in the building of bridges. When narrowing down your roof style choices, for good reason, bear in mind that roof shapes vary from region to region. Your budget, the weather, and the materials required to fulfil your budget are the key factors that affect the shape of a roof. If you need a roofing sheet manufacturer for your building contact Bansal Roofing Products Ltd. We can provide you with detailed structural drawings, roofing material and take care of the entire construction project.
Why Pre Engineered BuildingsAre Better Than Onsite Fabrication
It might appear that carrying out onsite fabrication of a steel building would be an easier and cheaper way to go about a construction project than having a pre-engineered building developed and built by a professional PEB manufacturer. Despite what it looks like, Pre-Engineered buildings have a ton of benefits which can help you save your time and money when compared with onsite fabrication. Let us look at some of them here. Benefits of Pre-Engineered Buildings (PEB) Structure: #1 – PEBs (Pre-Engineered Buildings) Are Lighter: It is a well-known fact that PEBs are much lighter than conventional buildings, but it is also worth noting that due to the specific customisation of parts Pre-Engineered buildings are even lighter than onsite fabricated structures. When you carry out onsite fabrication you must procure materials from the market like sections and gurters which are available in standard sizes only. Your structure has to be built around them and carrying out the optimisation gets very difficult. However, in the case of PEBs, this customisation is already carried out at the design stage even before assembling the parts which enable the building to be made considerably lighter. Also Read: Important Roofing Accessories That You Need For Your Roof #2 – Lower Cost Of Building: Let us talk about one of the most important criteria, that is cost. Pre-Engineered Buildings are an extremely cost-effective solution when it comes to building construction. The fact that PEBs are lighter when compared with onsite fabricated buildings means a significantly lower cost in comparison. As the building gets heavier the civil foundation cost also goes higher. When it comes to PEBs, the civil foundation cost is much lower which in turn decreases the entire cost of the project. Also, during the construction of a Pre-Engineered Building since the calculations are done much in advance you can have a much closer estimate of the cost of the entire building as other parameters like fabrication, welding, painting etc. are considered and fixed, whereas in the case of an onsite fabrication whereas in an onsite fabrication project you must make separate calculations for the per kg cost of the steel and then fabrication, welding, and painting. In addition to that, you will also have to include the wastage of the raw material which can be anywhere between 7-8% by the time the project is complete. With PEBs this wastage of raw materials can be avoided easily as the entire structure is prefabricated after performing all the calculations. This enables significant cost savings. #3 – On-Time Delivery: Giving the project to a PEB manufacturer means they can take end to end responsibility i.e from sourcing the materials to the construction of the building. This helps in maintaining strict delivery times as a PEB manufacturer can have multiple sources set up for the materials and can take care of lead times more effectively. This also helps save the raw materials from degradation because without proper planning you would end up buying a lot of the raw material when it is not required and then just dump it until your project reaches the stage where it becomes useful. Storage of raw materials for such longer periods can cause degradation and, depending on the climatic conditions in the area, can also cause rusting. A PEB manufacturer is well equipped for such circumstances and can keep the raw material safe or else procure it systematically according to the plan as and when it is required. Also Read: Know The Components of PEBs Structure #4 – Better Quality: A PEB manufacturer like Bansal Roofing can always assure you of the highest quality standards as we maintain strict quality checks on our premises. PEBs are designed and fabricated in controlled environments which allows a PEB manufacturer to personally check and ensure its quality. The incoming raw material is also passed through a quality check and if it doesn’t meet the required standards it is rejected. The consistency of welding and painting is also subject to a high level of scrutiny under expert supervision before it is dispatched for assembly. #5 – Ease of Installation: PEBs are famous for their ease of installation. Their assembly process is very simple and can be accomplished by fastening nuts and bolts on site. This also helps in completing the structure much faster when compared to onsite fabrication. Since the parts are manufactured in the factory while maintaining precision, it is easier to assemble them on the site without mismatching parts. The numerous benefits of Pre-Engineered Buildings make them the right choice for steel building construction rather than onsite fabrication. PEBs are cheaper, stronger, easier to assemble and can be constructed much faster. Bansal Roofing is a leading manufacturer of PEBs and has years of experience in the field without a single delay in any of the projects.
5 Reasons WhyBansal Roofing is TheBest Choice For PEB Manufacturer
Bansal Roofing Products Ltd. is the best PEB manufacturer in Vadodara and all over Gujarat and has held this crown for a very long time. Bansal roofing has several years of experience in design, erection and commissioning of Pre-Engineered Buildings and is known for excellent quality and reliability. Rich experience in the field and commitment to deadlines and quality makes Bansal Roofing one of the leading and most reputed PEB manufacturers in Vadodara. Those familiar with Pre-Engineered Buildings will be aware of their numerous benefits, some of which include high structural strength, durability and flexibility in design. But it is also important to find the right pre-engineered building manufacturer for your project because of the precision work that goes into the design and construction of the structure. Usage of the right materials and quality craftsmanship decides the life of the structure and is something that should not be compromised. Taking care of all these details, from sourcing the materials to building the structure is the work of experienced suppliers which is why Bansal Roofing’s expertise in the field helps overcome all these challenges easily. Here are five reasons why you should choose Bansal Roofing as your desired PEB manufacturer: #1 – Plenty of experience in the field: Bansal Roofing Products Ltd. has been in the field for more than 10 years and holds a rich experience in the design and construction of pre-engineered buildings. Bansal Roofing has successfully completed numerous projects while delivering full customer satisfaction and has built trust with the customers. Also Read: Tips for Maintenance of Pre-Engineered Buildings (PEBs) #2 – Timely Delivery: Bansal Roofing is known for delivering on time and maintains a track record of finishing all projects on or before time. We have never failed any project deadlines and always put extra efforts to ensure all the processes are streamlined so that no delays are faced with material procurement and construction. It is through a solid past experience in handling such projects that we can anticipate the challenges and take necessary actions to prevent any difficulties while executing the project. We have completed 100% projects on time and have never been charged with a late penalty to date. #3 – Commitment to Quality: It is always our aim to furnish products and services that are of the highest quality at a reasonable cost to all our customers. We take extra care in understanding the customer’s requirements to the minute level of detail so that we can deliver products and services that entirely satisfy customers. This dedication to quality has helped Bansal Roofing build a brand name and good reputation in the market. #4 – Completely In-house Manufacturing: Bansal Roofing takes care of entire PEB buildings construction projects with completely in-house designing, calculations and manufacturing of materials. More than 95% of the parts required are manufactured in-house. The company is well equipped to produce construction materials with state of the art machinery. All the designs of columns, rafters and other accessories are based on international structural standards. Since all the materials are developed in-house, it is possible to maintain strict quality checks and deliver structures that have a longer life. Also Read: The Difference Between Prefabricated and Pre-Engineered Steel #5 – CRISIL RATING – MSE1 Rating: Bansal Roofing Products Ltd. is a CRISIL rated company having “MSE 1” rating which means highest financial strength and high operating performance. This has enabled us to cater to various global markets and build a solid global presence. This sets us apart from competitors and makes Bansal Roofing a renowned brand and a trustworthy company. Bansal Roofing Products Ltd. is a well-known name in the market when it comes to manufacturing of pre-engineered buildings and years of experience and knowledge in the field has helped us become a company the people trust and count on.
Tips for Maintenance of Pre-Engineered Buildings (PEBs)
Pre-Engineered Buildings or PEBs are known for their versatility and their ease of construction while providing many benefits at the same time. They are strong, durable and can be designed according to the site conditions which make them an ideal choice for construction. But after a pre-engineered building or PEB manufacturer has completed their work and commissioned the building there are some extra measures you can take to extend the life of the building which we are going to talk about further. Like any other construction structure, pre-engineered buildings also need their regular maintenance to be able to keep performing satisfactorily under various climate conditions. It is always better to conduct preventive maintenance than investing in repairs later due to any unforeseen damage. The Maintenance Period of PEBs: PEBs are designed for extreme climatic conditions and can withstand harsh weathers, but even PEBs can be vulnerable to damage if not maintained regularly. The frequency of maintenance of PEBs depends on the kind of locality it has been installed in. PEBs installed in areas with humid climate conditions and highly polluted areas require more frequent maintenance than areas with mild climates and dry regions. [wpdatatable id=2 table_view=regular] Also Read: Application of Pre-Engineered Buildings (PEBs)Regular inspections of the building structure should be scheduled to identify any potential problems which may lead to significant damage in the future. It is a good idea to fix the problems while they are minor so that they can be eliminated with minimum costs. You may also get in touch with your PEB supplier to notify them of any defects that you may find during the inspection. Cleaning Regularly: Building areas like gutters, downspouts and roof sheets should be cleaned regularly to prevent debris and unwanted materials from collecting on them which can cause damage to the building. Cleaning the building also helps it retain its aesthetic appeal for a longer period. Accumulation of dirt in narrow areas and the formation of mould can trap moisture and start to corrode the material prematurely. So keeping all parts of the building clean is a good measure to prevent damage to the building. It can be easily done with a low-pressure water hose and a suitable cleaning solution. Taking Care of Fasteners: Believe it or not, the very fasteners that secure all the parts of the building together can become the reason for its destruction. Fasteners, if left loose, may allow for seeping of water into the frame of the building which may begin to corrode the building faster. Fasteners which have been damaged in any way should be immediately replaced because it may compromise the strength of the structure in that area and can also affect the load distribution of the entire structure. This may lead to unexpected structural damage. A Fresh Coat of Paint: The exterior of a Pre-Engineered Building is highly resistant to harsh weather, UV rays and corrosion. But sometimes they may receive a dent or a scratch from heavy vehicles, cranes during handling of equipment or forklifts which can cause dents on the building material. These areas can become the starting point for corrosion which can then spread further. So it is a good idea to cover these areas with paint that will prevent their exposure to the atmosphere and keep them protected. Maintenance of Accessories: Along with regular maintenance of the PEB, it is equally important to pay attention to all the accessories fitted with the building like doors, rolling shutters and vents. Occasionally lubricate the hinges and locks of the doors and make sure they are not allowed to swing back fully against the wall. The repeated impact caused by the doors on the walls can damage the structure. Regularly clean the guide channels of sliding doors so they can run smoothly on the guide. Keep the rolling shutters regularly lubricated and apply grease to the vertical guides. Keeping all the accessories of a PEB in a healthy condition can save repair costs and keep the building strong for a longer time. Pre-Engineered Buildings or PEBs have excellent durability which can be further enhanced by taking proper care of the building and running periodic maintenance on the building. But when working on the building extra safety precautions must be taken like using correct ladders, turning off electrical circuits, using cranes wherever required. By following the above points, you can greatly increase the life of PEBs and keep them performing at optimal levels. For more details on maintenance of PEBs, Contact us or Call us @ +91-9925050913 or +91-265-2581082. Bansal Roofing Products Limited is a leading manufacturer of PEB in Vadodara, Gujarat and with years of experience in the field can take care of entire PEB projects from design to construction.