Why are Steel Structure Buildings Recommended?
The results that steel can produce as a material in steel buildings in terms of structure and beauty are really inspiring and resourceful. While many architects have challenged the idea of using only steel to construct the skeleton of a building, modern architects are creating fluid and innovative designs using steel from its rust texture to polishing it for a high shine finish. Generally, steel structures are used owing to characteristics like: • Substantial elimination of delays due to weather• No need for form work• Termite and rot proof• Uniform quality• Economic in transportation and handling• High strength and stiffness per weight• Long Spans (i.e. large column-free area span)• Accurate detailing• Non-shrinking and non-creeping at ambient temperature• Ease of fabrication and mass production including production and hence better quality control Since steel structures have the following characteristics they are used extensively and have better chances of durability owing to high strength and uniform quality along with being termite and rot proof. Also Read: Why Pre-Engineered Buildings are better than onsite fabrication Let’s take a look at the advantages of using Steel in Steel Building Structures: Beauty: There is a sense of openness and liberation to the architects when using steel in building structures as it is subject to being made into stylish shapes and designs in order to create large open columns and interiors. Adaptability: Steel is a boon for architects as it can be adjusted and changed according to the whims and wishes of the architect. The frame which is made of steel can be adjusted, repositioned and can be altered as well. At the same time, steel also helps to extend the lifespan of the building structure For example, wall frames that are made from steel can be widened and a new interior layout of the building can also be created the same way! Cost-Effective: Steel is lightweight in comparison to tinder and RCC and is also easier to transport. Thus reducing the cost of transport, fuel cost, and also accelerates project schedules. Adding to these reasons is the fact that steel is energy efficient and creates minimum waste thus increasing the chances of being recycled. Ductility: Steel can be rolled, cut and shaped into the structure of the architect’s choice without any changes in composition or property. Durability: Steel is known to stand extreme weather conditions and forces like strong winds, earthquakes and the like. Steel also tends to remain unaffected by termites or fungi and bugs. When compared to wooden frames, steel structures prove to be more fire-resistant. Let’s have a look at what kind of building are steel structures used in: High Rise Buildings: Steel is used in High Rise Buildings due to its strength, lightweight, and speed of construction. Industrial Buildings: Steel is used in Industrial buildings owing to its ability to create a large span also known as column-free span spaces at a low cost Residential Buildings: Using steel in residential buildings is a practice since it is similar to wooden framed structures which in the case of steel is called the light gauge steel construction. Temporary Structures: Steel is used in temporary structures because it is easy to install and remove which serves the purpose of a temporary structure. Steel can be used in building structures owing to other reasons depending on its existing properties like the fact that a whole frame of steel can be erected in a matter of days where wooden frames may take weeks altogether hence reducing the corresponding construction time by 20-40%. Steel framing and floor systems also allow easy access and the ability to make alterations to existing electrical wiring, computer networking cables and communication systems. Steel built building structures are also more adaptable and have greater potential for alterations that can be made over time while extending the lifetime of the structure.
Benefits of Turbo Ventilators on Your Roof
You must have seen the rotating round equipment on industrial roofs. They are called turbo ventilators or eco ventilators whose purpose is to help to vent the hot air from inside the premises into the atmosphere. Turbo ventilators are self-driven equipment installed on the roofs to extract inside air. They don’t require additional energy as they are operated by the atmospheric wind and in doing so, inside air is exhausted through it and the natural inward flow of fresh air is boosted. Despite appearing a little complicated at the first glance, it is a piece of fairly simple equipment with minimum parts but provides a significant number of benefits. Let’s have a look at them. Provide effortless ventilation: As the name suggests, a turbo ventilator provides easy ventilation for all structures and help in moving damp, moist air outside the building which could otherwise cause damage to equipment used in the building. Accumulation of moisture and dampness can cause rusting in metal equipment and can provide a favourable environment for different kinds of bacteria and fungi. Turbo ventilators allow the circulation of fresh air in the premises and prevent damages caused by mould, fungi and moisture. Also Read: The Advantages of Installing Skylight in Building Use less space: Turbo ventilators on roofs consume lesser space compared to other methods of ventilation and they are much more effective. Comparatively, other ventilations like ridge vents require more space and are not as effective. Turbo ventilators are flexible and can be placed at almost any optimum place on the roof. Don’t require additional energy: Turbo ventilators are completely self-driven and don’t require any energy source like electricity. They are operated by the wind and can keep running endlessly without supplying any energy. Even slight wind on the rooftops is enough to operate it. This way they result in huge cost savings. No breaking down: The simple rounded design of turbo ventilators makes them modest equipment with the least amount of parts. Hence they don’t face failure much often and are only affected by large debris or huge storms. With minimal maintenance and oiling, they can keep going for years before you need to replace them. Turbo ventilators are very helpful ventilation equipment. However, it is important to note that they can be affected by frequent storms which can damage them and make them prone to rusting. Sometimes, a little friction may also make them noisier which can be solved by regular oiling. Otherwise, they are very reliable equipment that can keep working without supervision. Turbo ventilator installation is however a little tricky and requires precision cutting on roofs and additional layers of sealant to prevent leakages. So it is a job best left to professionals. Bansal Roofing Private Limited are a leading supplier of turbo ventilators and can help you with the design, manufacturing as well as installation of the product according to your application. For more information, get in touch today.
How To Choose The Best PEB ContractorFor Your Steel Buildings Manufacturing
A PEB is a cost-effective solution for your offices, exhibition halls, conference centres, factories, power plants, warehouses etc. Do you desire a flexible engineered structure that can be tailored to your specific project requirements? Then a pre-engineered steel building is one of the best options for you! A PEB Contractor or PEB manufacturer can design and customise the building just as per your requirement. Do you know that Pre-Engineering Buildings are becoming increasingly popular due to their results-oriented benefits? Its advantages are the primary cause for the construction industry’s evolution in India during the previous several decades. Pre-engineered buildings have several advantages, including cost-effectiveness, recyclability, design flexibility, quick construction, and high durability. But who will be the right person for your manufacturing of steel building? Locate a reputable roofing company in your location and start receiving better dimensional services. Finding a suitable contractor, on the other hand, is a difficult task. When looking for the BEST PEB CONTRACTOR FOR YOUR STEEL BUILDINGS MANUFACTURING, there are a few factors to keep in mind. Factors to Consider Before Choosing a PEB Contractor: #1 – Evaluate The Quality Parameters: Every PEB contractor adheres to a set of guidelines to guarantee that the quality of their work matches their price. The term “quality” refers not only to the materials used in the construction of the structure but also to all other aspects. Make sure you request the documentation that specifies the vendor’s quality assurance procedures. This will allow you to determine whether or not the vendor is adhering to the quality check standards specified in the PEB offer. Having this document on hand can also assist the customer in the future when the Pre-Engineered building project is being completed. Bansal Roofing Products Ltd adheres to stringent quality standards to ensure that our clients receive the finest possible service. Also Read: Why is a PEB the Right Choice for Your Building Construction #2 – Ensure High Quality Manufacturing Material: You must be knowing that for a Highly Durable and Strong Steel Building Structure high-quality kind of manufacturing material is important to use. So The quality of the material is the main thing is to be noted before choosing any PEB company for construction. #3 Choose An Established & Experienced PEB Company: When it comes to choosing the right PEB contractor, always go with an experienced PEB manufacturing business since an experienced PEB company will always have a team of trained specialists who will uphold the company’s standard of producing high-quality products utilising high-grade raw materials. Bansal Roofing Products Ltd’s qualified technical team has all you need for any type of steel structure. When difficulties emerge during the construction process, such teams can handle the situation and even advise the customer on any design changes that may be required. So always choose an established & experienced PEB Contractor. #4 – Always Verify The Past Project: It is necessary to identify and verify the types and number of projects completed by the PEB contractor. To determine whether the vendor delivers the quality of the construction materials, one needs to visit a few of the vendor’s previous Pre-Engineered Building projects. This verification aids you in determining what a PEB contractor can provide you in terms of results. It is a very reliable method of determining the vendor’s ability to deliver good value for money with their service. Also Read: Why Pre Engineered Buildings Are Better Than Onsite Fabrication #5 – Availability of Tailor-Made Solutions: Pre Engineered Building (PEB) is a concept of building with high structural strength and an inexpensive design that overcomes traditional fabrication and reduces foundation stress, resulting in cheaper civil construction costs. But, Every client has a unique set of requirements and design calculations, thus it’s critical that you achieve the PEB structure you desire. Before you choose a PEB contractor, be sure it can meet all of your needs and provide you with a specific tailor-made solution. BANSAL ROOFING is well-equipped to construct Pre-Engineered Buildings in accordance with your specifications. We have all of the most up-to-date equipment. The whole design of Columns, Rafters, and other Accessories is based on worldwide structural standards, with high-tech welding and high-quality manufacturing. Keep these five essential elements in mind while looking for a PEB vendor for your next steel construction project, and we hope that they will prove to be useful and valuable. For contractors and investors, pre-engineered steel structures are the most versatile option. Many contractors and engineers that specialize in the use of traditional steel structures have lately moved to the usage of pre-engineered steel buildings. Bansal Roofing as a PEB contractor claims to meet your requirements in a Timely and Cost-effective manner. Remember that having the appropriate contractor not only speeds up the construction process but also makes it run more smoothly. So choose accordingly.